Good morning,
In these unusual times where Corona is dominating the news, we try to keep the business going as “normal” as possible. All of our employees are working from home and we are in a very luxury position that we work from the cloud. Therefore, even though the circumstances are extraordinary, some “ordinary” product news from our end. We are introducing the Autosmart transmitters enabling an accuracy of 0.1 degree C combined with our IRt/c sensor line. We clearly received the message that measurement precision is necessary to deliver the processing speeds and quality output required to remain competitive.
If you have questions, please do not hesitate to contact me.
Stay safe, remain healty.
WATERTOWN, Mass., ZIJTAART, the Netherlands — Exergen Global today announced its AutoSmart Transmitters, the first transmitter in the world capable of fully calibrating Exergen IRt/c sensors to provide unprecedented accuracy of 0.1 °F or 0.1 °C by custom calibration over a very specific range. The AutoSmart Transmitters not only delivers accuracy that is 10 times better than standards on infrared sensors with the same output, it also provides repeatability of ± 0.01% °C. Before the introduction of AutoSmart Transmitters, sensors only offered accuracy within 1 °F or 1 °C, yet manufacturers today need much greater measurement precision to deliver the processing speeds and quality output required to remain competitive.
“Precise and accurate temperature measurement is a competitive necessity in all markets and in some, such as healthcare, it can represent the difference between life and death,” said Bram Stelt, CEO of Exergen Global. “Customers worldwide have come to expect increased speeds from manufacturing processes, and now that speed is so essential, it is more important than ever that temperatures be controlled to the nth degree. The AutoSmart Transmitter ensures that the thermal sensors employed in all industries can deliver BOTH the speed and accuracy required to meet customers’ needs and expectations.”
Exergen Global's AutoSmart handbook contains all AutoSmart IRt/c datasheets.
The handbook contains the following datasheets:
The following procedure is recommended:
Install the AutoSmartIRt/c as close as practical to view the target material to be measured.
Wire the AutoSmartIRt/c to the controller, PLC, etc. in standard fashion (see PINOUT and WIRING DIAGRAM)
Bring the process up to normal operating temperature and measure the actual temperature of the target material with the Microscanner D-Series, Infrared Thermometer or any other reliable reference.
If using a PID controller: adjust “input offset,” “zero”, “low cal,” on the readout device to match the reading of your reference.
Installation Complete. (For OEM installations preset the same adjustments. Individual calibration is not required.)
Contact Bram Stelt
Bram@exergenglobal.com
The Netherlands:
Pastoor Clercxstraat 26
5464RH Veghel
Tel: +31 (0)413 376 599
Fax: +31 (0)413 379 310
office@exergenglobal.com
The United States:
400 Pleasant Street
Watertown, MA 02472
Phone: +1 617 649 6322
Fax: +1 617 923 9911
office@exergenglobal.com
The Netherlands:
Pastoor Clercxstraat 26
5465 RH Veghel
Tel: +31 (0)413 376 599
Fax: +31 (0)413 379 310
office@exergenglobal.com
The United States:
400 Pleasant Street
Watertown, MA 02472
Phone: +1 617 649 6322
Fax: +1 617 923 9911
office@exergenglobal.com
VAT: NL852629424B01
Copyright Exergen Global 2020